Acrylia Plat Receipes Bugged?

[WENYWEN]

I tried making several of the acrylia plate receipes listed on the site in pok forges. I keep getting the message: These items do not combine it a container of this type. Anyone know what the problem could be? I tried the small acrylia plate gauntlets, large acrylia plate gauntlets, and the small acrylia plate visor. Any help would be greatly apprciated.

Celf Rytchus 54th Cleric
Ralloz Zek
Baking - 250
Brewing - 200
Smithing - 198
Pottery - 200
Jewel Craft - 200
Fletching - 200
Tailoring - 189

[Kieroth_whiteleaf]

Some things I'd check (not looking it up so I don't know the exact recipes):

Make sure you have the temper, correct numbers of sheets *AND* the correct hammer. IIRC the acrylia stuff requires one of the luclin hammers (although I've never made that stuff and am working off memory). Could possibly require vah shir anvil as well.

Also, make sure you're using folded acrylia sheets and not just acrylia sheets.

Correct molds as well - you probably want plate, not fine plate.

It'd be much easier to debug if you told us what you were trying to use.

SFG

[WENYWEN]

Here is what I am using as a receipe

acrylia chain jointing,
combine acrylia temper,
combine smithy hammer,
folded sheet of acrylia(2),
leather padding,
plate gauntlet mold
(tried both with flask of water and without)
IN A POK FORGE.

I tried with a variety of molds (large plate mold, small plate mold, plate mold)

If anyone can make this work or let me know what is missing/wrong I would appreciate it very much. As you can see this is the receipe as listed on the site under Acrylia Plate Gauntlets. Once again any help would be appreciated.

Celf

[cattywumpus]

I made several pieces for my twink bard about a month ago. The combines for Breastplate, Greaves, Visor, and Collar worked fine in Shar Vahl.

Try to do the combines somewhere other than PoK. There maybe an issue with tanaan forges.

[Aamdor]

There are two types of "plate" molds and I had to sell all the ones I bought from the dwarves and go buy from the other vendors. The recipe shows that the only PoK mold vendors for acrylia are:

Horil Imsin @ 390, 1085, Northern trader building
Magnar Quok @ 45, 320, Eastern trader building

Good luck.

[WENYWEN]

Thanks for the vendor Information

That did the trick. I bought a plate greaves mold from one of the venders you suggested, it combined right away. Lol, It would be nice if they called the mold by a different name. Any way thanks again for the help.

Celf

[Dunthor Warsmith]

Lol, It would be nice if they called the mold by a different name.

The molds for acrylia plate (and most other plates) are "Small/<blank>/Large Plate <piece> mold" (ie, "Plate Boot Mold"), whereas the second set are "Full Plate <peice> mold" (ie, "Full Plate Boot Mold")- the second set has "Full" in the name, and never any size. Its used for human cultural and PoP armors.